Editing: OpenGrid Board

Model summary

Adjustable parameters and constraints

• Board profile (Full/Lite/Heavy/Hybrid), X/Y cell counts, half-cell directions, chamfers, connector holes, screw-hole mode, and screw dimensions.
• Profile: Lite 4 mm, Full 6.8 mm, Heavy 13.8 mm (double-sided), Hybrid 13.8 mm (Heavy perimeter / Full inside); X/Y counts are each 1–10 cells, with up to 10.5 displayed cells when a half-cell direction is selected (28 mm grid pitch); chamfers can be none, corners, or everywhere; connector holes can be enabled or disabled with side selection; screw-hole modes are none, corners, everywhere, or by row and column, with row/column intervals of 1–10 plus a center-hole option (the center hole requires at least a 2×2 grid); custom screw dimensions require a through-hole diameter > 0, a head diameter no larger than 28 mm and no smaller than the through-hole, an inset from 0 up to the board thickness, and a countersink angle strictly between 0° and 180°.

Available export format: STL.